I am trying to run perfstat from m,y linux workstation that has paswordless ssh into the filer the command I use is ./perfstat7_20121031.sh -S filer_ip -h root@filer_ip –t 5 –i 3 –I > perfstat.o but the output does not give any perfstat of the filer any idea?
... View more
just found out my df -r -h shows /vol/dr_esx_vol2_sr/ 1380GB 1349GB 30GB 0GB /vol/dr_esx_vol2_sr/ snap reserve 0GB 404GB 0GB 0GB /vol/dr_esx_vol2_sr/.. so my snapshots are using 404GB?
... View more
I am getting this warning from dfm Global Status: NonCritical; /vol/dr_esx_vol2_sr is full (using or reserving 98% of space and 0% of inodes, using 98% of reserve). aggr show_space -h Volume Allocated Used Guarantee dr_esx_vol2_sr 1371GB 1366GB none df -V -g -h Filesystem total used avail capacity Mounted on /vol/dr_esx_vol2_sr/ 1380GB 1349GB 30GB 98% /vol/dr_esx_vol2_sr/ rw-ntap2> vol options dr_esx_vol2_sr nosnap=on, nosnapdir=on, minra=off, no_atime_update=off, nvfail=off, ignore_inconsistent=off, snapmirrored=off, create_ucode=off, convert_ucode=off, maxdirsize=45875, schedsnapname=ordinal, fs_size_fixed=off, compression=off, guarantee=none, svo_enable=off, svo_checksum=off, svo_allow_rman=off, svo_reject_errors=off, no_i2p=off, fractional_reserve=0, extent=off, try_first=volume_grow, read_realloc=off, snapshot_clone_dependency=off, nbu_archival_snap=off snap reserve Volume dr_esx_vol2_sr: current snapshot reserve is 0% or 0 k-bytes. snap list Volume dr_esx_vol2_sr working... %/used %/total date name ---------- ---------- ------------ -------- 24% (24%) 21% (21%) Oct 29 08:01 hourly.0 25% ( 2%) 23% ( 2%) Oct 29 00:01 nightly.0 28% ( 5%) 26% ( 4%) Oct 28 20:01 hourly.1 28% ( 1%) 27% ( 1%) Oct 28 16:00 hourly.2 29% ( 0%) 27% ( 0%) Oct 28 12:00 hourly.3 29% ( 0%) 28% ( 0%) Oct 28 08:00 hourly.4 30% ( 2%) 29% ( 2%) Oct 28 00:00 nightly.1 30% ( 0%) 29% ( 0%) Oct 27 20:00 hourly.5 and then in vmware the lun shows as normal status 1.27TB and 347.39GB Free any idea?
... View more
how can you tell that is where the new shelf is? disk show -n shows nothing. disk show -v eq-ntap1> disk show -v DISK OWNER POOL SERIAL NUMBER HOME
... View more
this is the result i got Expanders on channel 0a: Level 1: WWN 50050cc103124cbf, ID 0, Serial Number ' SHU0954293G1F8R', Product 'DS424IOM3 ', Rev '0132', Slot A Level 2: WWN 50050cc1028c833f, ID 1, Serial Number ' SHU0954293H17T6', Product 'DS424IOM3 ', Rev '0132', Slot A Expanders on channel 0b: Cannot Complete operation on channel 0b; Status Not Available. Expanders on channel 2a: Level 1: WWN 50050cc1047328ff, ID 12, Serial Number ' SHU0971734NM9N0', Product 'DS424IOM3 ', Rev '0132', Slot B Level 2: WWN 50050cc102aa393f, ID 11, Serial Number ' SHU0954293G1B6S', Product 'DS424IOM3 ', Rev '0132', Slot B Level 3: WWN 50050cc10312bdbf, ID 10, Serial Number ' SHU0954293G1FHG', Product 'DS424IOM3 ', Rev '0132', Slot B Expanders on channel 2b: Cannot Complete operation on channel 2b; Status Not Available. Expanders on channel 2c: Level 1: WWN 50050cc1026e773f, ID 1, Serial Number ' SHU0954293H17T6', Product 'DS424IOM3 ', Rev '0132', Slot B Level 2: WWN 50050cc1031239ff, ID 0, Serial Number ' SHU0954293G1F8R', Product 'DS424IOM3 ', Rev '0132', Slot B Expanders on channel 2d: Level 1: WWN 50050cc10312b83f, ID 10, Serial Number ' SHU0954293G1FHG', Product 'DS424IOM3 ', Rev '0132', Slot A Level 2: WWN 50050cc102aa793f, ID 11, Serial Number ' SHU0954293G1B6S', Product 'DS424IOM3 ', Rev '0132', Slot A Level 3: WWN 50050cc10473347f, ID 12, Serial Number ' SHU0971734NM9N0', Product 'DS424IOM3 ', Rev '0132', S so what is it? why does fcamin device_map show blank?
... View more
why do I get this error when i modify the security of the qtree? qtree security /vol/dr_esx_vol12_sr/dr_esx-vol12_sr_qtr unix qtree: Warning NFS not licensed - proceeding. rw-ntap2>
... View more
i wsa able to solve this by c;learing out the snapmirror.conf file which had the old stale snapmiror relationship in there. wrfile /etc/snapmirror.conf thanks
... View more
but when i have that volumme added on destination node and the afterwards set the volume to be restricted, the dive is not accessible and the entire node freezes
... View more
another thing, in oncommand, hen i add he desination drive, looks like it has to be in restricted mode. but in restricted mode, I cannot even see that drive in windows. and I cannot setup a mscs failover cluster.
... View more
why legacy? I have options snapmirror enabled but options snapmirror.access is set to destination host options snapmirror.access destination_host rdfile /etc/snapmirror.allow on source system shows source system ip and hostname
... View more
where ae the snapmirror logs? the old relationship is between the same systems but the volumes have been destroyed. Thee is no firewall between the 2 networks and both filers are pingable from each other
... View more