I have a Netapp AFF C800 system with several network interfaces including 2 x 25Gbps 2-port cards. These 25Gbps ports are seen by Ontap as RDMA RoCE e ...read more
We ran in this problem after upgrading de PSTK to version 9.14, scripts on version 9.10 works ok.when we connect with connect-nccontroller "$netapp ...read more
On NETAPP CVO (GCP)my vol0 size is increasing every month, is it expected as root volume contains sys config files, log files.is there a way we can ch ...read more
When will Active IQ Unified manager 9.14 or newer version become GA?Currently Active IQ UM 9.14 still RC1.When will Active IQ UM support RHEL 9?Or hig ...read more
I have been searching and googling and also checking HWU, but cannot find it. A bucket consists of a FlexGroup, which again consits of one or more fle ...read more
Hi everyone,We're currently investigating some significant differences in the reported physical used capacity between NetApp versions 9.13 and 9.14 an ...read more
Hello All,because we have more Active IQUM installed in more customers, I ask you if have find the possibility to personalize Object on email alert.I ...read more
Hi, We have existing VNX storage connected to the Brocade SAN switches. (no free ports available on Brocade SAN Switches) We have procured new AFF4 ...read more
We ran in this problem after upgrading de PSTK to version 9.14, scripts on version 9.10 works ok.when we connect with connect-nccontroller "$netapp ...read more
I have been searching and googling and also checking HWU, but cannot find it. A bucket consists of a FlexGroup, which again consits of one or more fle ...read more
Hi everyone,We're currently investigating some significant differences in the reported physical used capacity between NetApp versions 9.13 and 9.14 an ...read more
Hi, We have existing VNX storage connected to the Brocade SAN switches. (no free ports available on Brocade SAN Switches) We have procured new AFF4 ...read more
Hi, trying to run VVol testing on laptop with the simulator and 9.6 (finshing off some old labs), have 99% of the software (apart from the API servic ...read more
When obtaining the usage capacity of end-user servers,we connect to the NetApp server via HTTPS and use the "quota-report-iter" of the OntapClusterAPI ...read more