We found what appears to be a bug or unintended behavior with add-ncnfsservice. We want to create a new NFS service configuration on a vserver, but we ...read more
I am not sure if this is the correct forum, but I did see other posts about NetApp volumes here. Please advise of the correct forum if needed.On the G ...read more
I just upgraded the PowerShell Toolkit from 9.15.1.2407 to 9.16.1.2410. As it seems to happen with nearly every upgrade, it isn't working. First, what ...read more
Hello, we have an E2824 with 10 SSD drives in RAID 5 and 11 SAS drives in RAID 5, and we wanted to upgrade all the SAS drives to SSDs. Would this arra ...read more
Hi There, I am not sure i picked the correct Board, but here goes. We have a lot of older data on several windows CIFS that needs to be cleaned up , ...read more
Hi, trying to use ansible to create fc target for a vserver but no luck, playbook below , the error is fatal: [localhost]: FAILED! => {"changed": fal ...read more
Hello, To have better knowledge/understanding about MCCIP, i try to configure one in my lab. I use AFF A220 HA pair and a Lenovo DM5000H HA pair + B ...read more
Hi everyone, I’m running an AFF A250 system, and recently, one of the SSDs failed unexpectedly. The system flagged it as failed, but there were no pri ...read more
Hello, we have an E2824 with 10 SSD drives in RAID 5 and 11 SAS drives in RAID 5, and we wanted to upgrade all the SAS drives to SSDs. Would this arra ...read more
Hello,Ontap cannot boot. I tried any mode. It comes with the same error, also backup image or a new image with loaded with netboot.So i can not get i ...read more
Hi All,Yes we are still running an AltaVault and almost ready to migrate the data, however the initial requirement is to get the AltaVault off our F5. ...read more
Hi!So far I have configured S3 buckets for FabricPool or Veeam environments with self-signed certificates. The thing is that given the multiple applic ...read more
Please let me check the system requirements for using PowerShell Toolkit 9.16.1.The Windows 2022 server on which I plan to install the PowerShell Tool ...read more
PowerShell Toolkit 9.16.1を使用するためのシステム要件について確認させてください。PowerShell Toolkitをインストール予定のWindows2022サーバは現在.NET Framework 4.8が導入されていますが、システム要件に記載がある.NET Framew ...read more
1,459
Users Online
140,645
Posts
19294
Kudos
